![]() This should be setup by default, but to set it up again…Īdd a pool of IPs for the DHCP server to use. We should see that we have a public IP assigned to us by the ISP. ![]() > ip dhcp-client add interface=vlan10 use-peer-dns=yes use-peer-ntp=yes add-default-route=yes Hopefully your ISP has a DHCP server, if not goto IP->Addresses add new Static IP. Setup VLAN10 on Port1/Eth1 by: > interface vlan add vlan-id=1 interface=ether1Īttach your WAN cable to Port 1. In New Zealand, most ISPs use VLAN10 to provide your internet. I was getting login attempts from Russia only 5 minutes after plugging in! /ip serviceĪ note about VLANs. Also change the default SSH port to something other than 22. It’s also good to disable most router services that you are not using. The first thing you should do after logging in, is to set up a proper password. Connect to the router via 192.168.88.1 with the admin user, there is no password.ĭon’t be like me and connect it up to port1 and wonder why I cannot connect to the router. As there is a DHCP server we can leave or NIC to be configured for DHCP. (winbo圆4.exe) Check the Mikrotik website to see what the default configuration is.įrom this description, we need to connect up our computer to one of the switched ports (2 to 8). Connect to Deviceĭownload the WinBox configurator tool. When the “USER” led begins to flash, release the button to clear config. Press and hold the reset button while turning the unit on. It’s a good idea to reset the entire config. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |